View MAX4888AETI_4470061.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

19-0770; Rev 1; 1/09
KIT ATION EVALU BLE AVAILA
5.0Gbps PCI Express Passive Switches
General Description Features
Single 1.65V to 3.6V Power-Supply Voltage Low Same-Pair Skew of 7ps Low 120A (Max) Quiescent Current Supports PCIe Gen I and Gen || Data Rates Flow-Through Pin Configuration for Ease of Layout Industry-Compatible Pinout Lead-Free Packaging
MAX4888A/MAX4889A
The MAX4888A/MAX4889A high-speed passive switches route PCI Express(R) (PCIe) data between two possible destinations. The MAX4888A is a quad single-pole/double-throw (4 x SPDT) switch ideally suited for switching two half lanes of PCIe data between two destinations. The MAX4889A is an octal single-pole/double-throw (8 x SPDT) switch ideal for switching four half lanes of PCIe data between four destinations. The MAX4888A/ MAX4889A feature a single digital control input (SEL) to switch signal paths. The MAX4888A/MAX4889A are fully specified to operate from a single 3.0V to 3.6V power supply and also operate down to +1.65V. The MAX4888A is available in a 3.5mm x 5.5mm, 28-pin TQFN package. The MAX4889A is available in a 3.5mm x 9.0mm, 42-pin TQFN package. Both devices operate over the -40C to +85C temperature range.
Ordering Information/ Selector Guide
PART MAX4888AETI+ MAX4889AETO+ PIN-PACKAGE 28 TQFN-EP* 42 TQFN-EP* CONFIGURATION Two Half Lanes Four Half Lanes
Applications
Desktop Computers Servers/Storage Area Networks Laptops
Note: All devices are specified over the -40C to +85C operating temperature range. +Denotes lead(Pb)-free/RoHS-compliant package. *EP = Exposed paddle.
PCI Express is a registered trademark of PCI-Sig Corp.
Typical Application Circuit appears at end of data sheet.
Pin Configurations
TOP VIEW
NC1+ NC2+ NO1+ NO2+ NC3+ NC4+ NO3+ NO4+ COM4NC1NC2NO1NO2NC3NC4NO3NC1+ NC2+ NO1+ NO2+ NC1NC2NO1NO2GND NO421 GND 20 V+ 19 GND 18 V+ 3 COM14 GND 5 V+ 6 COM2+ 7 COM28 V+ 9 SEL 10 11 12 13 14 15 16 17 COM3+ COM4+ COM3GND GND GND V+
V+
24 23 22 21 20 19 18 17 16 15 GND 25 V+ 26 GND 27 V+ 28 1 GND *EP + 2 SEL 3 N.C. 4 COM1+ 5 COM16 COM2+ 7 COM28 V+ 9 N.C. 10 GND 14 GND 13 V+ GND 39 V+ 40 GND 41 V+ 42
38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22
MAX4888A
12 GND 11 V+
MAX4889A
*EP + 1 GND 2 COM1+
TQFN
*CONNECT EXPOSED PADDLE TO GROUND.
TQFN
________________________________________________________________ Maxim Integrated Products
V+
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
5.0Gbps PCI Express Passive Switches MAX4888A/MAX4889A
ABSOLUTE MAXIMUM RATINGS
(All voltages referenced to GND, unless otherwise noted.) V+ .............................................................................-0.3V to +4V SEL, COM__, NO__, NC__ (Note 1) .............-0.3V to (V+ + 0.3V) | COM__ - NO__ |, | COM__ - NC__ | (Note 1) ...................0 to 2V Continuous Current (COM_ to NO__/NC__) .....................70mA Peak Current (COM__ to NO__/NC__) (pulsed at 1ms, 10% duty cycle)..................................70mA Continuous Current (SEL).................................................30mA Peak Current (SEL) (pulsed at 1ms, 10% duty cycle)................................150mA Continuous Power Dissipation (TA = +70C) 28-Pin TQFN (derate 20.8mW/C above +70C) ....1666.7mW 42-Pin TQFN (derate 35.7mW/C above +70C) ....2857.1mW Operating Temperature Range ...........................-40C to +85C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) .................................+300C Junction Temperature ......................................................+150C
Note 1: Signals on SEL, NO__, NC__ or COM__ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maximum current rating.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V+ = 3.0V to 3.6V, TA = -40C to +85C, unless otherwise noted. Typical values are at V+ = 3.3V, TA = +25C.) (Note 2)
PARAMETER ANALOG SWITCH Analog-Signal Range VCOM_, VNO_, VNC_ | VCOM_ VNO_ | , | VCOM_ VNC_ | RON RON RON RFLAT(ON) INO_(OFF) INC_(OFF) ICOM_(ON) V+ = 3.0V, ICOM_ = 15mA, VNO_ or VNC_ = 0V, 1.8V V+ = 3.0V, ICOM_ = 15mA, VNO_ or VNC_ = 0V (Notes 3, 4) V+ = 3.0V, ICOM_ = 15mA, VNO_ or VNC_ = 0V (Notes 3, 4) V+ = 3.0V, ICOM_ = 15mA VNO_ or VNC_ = 0V, 1.8V (Notes 4, 5) V+ = 3.6V, VCOM_ = 0V, 1.8V, VNO_ or VNC_ = 1.8V, 0V V+ = 3.6V, VCOM_ = 0V, 1.8V, VNO_ or VNC_ = VCOM_or unconnected -1 -1 -0.1 (V+ - 1.2) V SYMBOL CONDITIONS MIN TYP MAX UNITS
Voltage Between COM and NO/NC
0
1.8
V
On-Resistance On-Resistance Match Between Pairs of Same Channel On-Resistance Match Between Channels On-Resistance Flatness NO_ or NC_ Off-Leakage Current COM_ On-Leakage Current
7 0.1 0.6 0.06 1 2 2 +1 +1
A A
2
_______________________________________________________________________________________
5.0Gbps PCI Express Passive Switches MAX4888A/MAX4889A
ELECTRICAL CHARACTERISTICS (continued)
(V+ = 3.0V to 3.6V, TA = -40C to +85C, unless otherwise noted. Typical values are at V+ = 3.3V, TA = +25C.) (Note 2)
PARAMETER DYNAMIC Turn-On Time Turn-Off Time Propagation Delay Output Skew Between Pairs Output Skew Between Same Pair On-Loss SYMBOL tON tOFF tPD tSK1 tSK2 CONDITIONS VNO_ or VNC_ = 1.0V, RL = 50, Figure 1 VNO_ or VNC_ = 1.0V, RL = 50, Figure 1 RS = RL = 50, unbalanced, Figure 2 RS = RL = 50, unbalanced; skew between any two pairs, Figure 2 RS = RL = 50, unbalanced; skew between two lines on same pair, Figure 2 RS = RL = 50, unbalanced, Figure 3 Crosstalk between any two pairs, RS = RL = 50, unbalanced, Figure 3 RS = RL = 50 Signal = 0dBm, RS = RL = 50, Figure 3 Figure 4 f = 10MHz f = 1.25GHz 1MHz < f < 100MHz 500MHz < f < 1.25GHz f = 50MHz MIN TYP 90 10 50 50 10 -0.5 dB -1.4 -53 dB f = 1.25GHz -32 5.0 -56 dB -26 1 2 0.5 1.4 100 VSEL = 0V or V+ -1 1.65 VSEL = 0V or V+ VSEL = 0V or V+ Human Body Model MAX4888A MAX4889A -1 6 +1 3.60 60 120 +1 pF pF V V mV A V A A kV Gbps MAX 250 50 UNITS ns ns ps ps ps
GLOS
Crosstalk
VCT1
Signaling Data Rate Off-Isolation NO_/NC_ Off-Capacitance COM_ On-Capacitance LOGIC INPUT Input-Logic Low Input-Logic High Input-Logic Hysteresis Input Leakage Current POWER SUPPLY Power-Supply Range V+ Supply Current Input Leakage Current ESD PROTECTION COM_+, COM_-
BR VISO
CNO_/NC_(OFF) Figure 4 CCOM_(ON) VIL VIH VHYST IIN V+ I+ IIN
Note 2: All units are 100% production tested at TA = +85C. Limits over the operating temperature range are guaranteed by design and characterization and are not production tested. Note 3: RON = RON (MAX) - RON (MIN). Note 4: Guaranteed by design. Not production tested. Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal range.
_______________________________________________________________________________________
3
5.0Gbps PCI Express Passive Switches MAX4888A/MAX4889A
Typical Operating Characteristics
(TA = +25C, unless otherwise noted.)
ON-RESISTANCE vs. VCOM
MAX4888A/89A toc01
ON-RESISTANCE vs. VCOM (V+ = 1.8V)
TA = +85C 12 10 RON () 8 6 4 TA = -40C TA = +25C
MAX4888A/89A toc02
ON-RESISTANCE vs. VCOM (V+ = 2.5V)
TA = +85C 12 10 RON () 8 6 4 2 0 TA = -40C TA = +25C
MAX4888A/89A toc03
10.0 9.5 9.0 8.5 RON () 8.0 7.5 7.0 6.5 6.0 5.5 5.0 V+ = 3.3V V+ = 2.5V V+ = 1.8V
14
14
2 0 -0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 VCOM (V) -0.1 0 0.1 0.2 0.3 VCOM (V) 0.4 0.5 0.6
-0.1
0.1
0.3
0.5 0.7 VCOM (V)
0.9
1.1
1.3
ON-RESISTANCE vs. VCOM (V+ = 3.3V)
MAX4888A/89A toc04
SUPPLY CURRENT vs. TEMPERATURE (MAX4889A)
MAX4888A/89A toc05
LOGIC THRESHOLD vs. SUPPLY VOLTAGE
MAX4888A/89A toc06
14 12 TA = +25C 10 RON () 8 6 4 2 0 TA = -40C TA = +85C
80 70 SUPPLY CURRENT (A) 60 V+ = 3.3V 50 40 30 20 10 0 -40 V+ = 1.8V -15 10 35 TEMPERATURE (C) 60 V+ = 2.5V
1.2 1.1 LOGIC THRESHOLD (V) 1.0 0.9 0.8 VIL 0.7 0.6 0.5 VIH
-0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 VCOM (V)
85
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 SUPPLY VOLTAGE (V)
TURN-ON/-OFF TIME vs. SUPPLY VOLTAGE
240 220 200 180 160 140 120 100 80 60 40 20 0
MAX4888A/89A toc07
NO_ tON
tON/tOFF (ns)
NC_ tON NO_ tOFF NC_ tOFF
1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 SUPPLY VOLTAGE (V)
4
_______________________________________________________________________________________
5.0Gbps PCI Express Passive Switches
Typical Operating Characteristics (continued)
(TA = +25C, unless otherwise noted.)
EYE DIAGRAM (V+ = 1.8V, f = 1.25GHz, 600mVP-P PRBS SIGNAL, RS = RL = 50)
MAX4888A/89A toc08
MAX4888A/MAX4889A
EYE DIAGRAM (V+ = 2.5V, f = 1.25GHz, 600mVP-P PRBS SIGNAL, RS = RL = 50)
MAX4888A/89A toc09
EYE DIAGRAM (V+ = 3.3V, f = 1.25GHz, 600mVP-P PRBS SIGNAL, RS = RL = 50)
VCOM_+
MAX4888A/89A toc10
VCOM_+
VCOM_+
50mV/div
50mV/div
50mV/div
VCOM_50ps/div *PRBS = PSEUDORANDOM BIT SEQUENCE = GEN 1, 2.5Gbps; U1 = 400ps
VCOM_50ps/div *PRBS = PSEUDORANDOM BIT SEQUENCE = GEN 1, 2.5Gbps; U1 = 400ps
VCOM_50ps/div *PRBS = PSEUDORANDOM BIT SEQUENCE = GEN 1, 2.5Gbps; U1 = 400ps
EYE DIAGRAM (V+ = 1.8V, f = 2.5GHz, 600mVP-P PRBS SIGNAL, RS = RL = 50)
MAX4888A/89A toc11
EYE DIAGRAM (V+ = 2.5V, f = 2.5GHz, 600mVP-P PRBS SIGNAL, RS = RL = 50)
MAX4888A/89A toc12
EYE DIAGRAM (V+ = 3.3V, f = 2.5GHz, 600mVP-P PRBS SIGNAL, RS = RL = 50)
VCOM_+
MAX4888A/89A toc12
VCOM_+
VCOM_+
50mV/div
50mV/div
50mV/div
VCOM_25ps/div *PRBS = PSEUDORANDOM BIT SEQUENCE = GEN 11, 5.0Gbps; U1 = 200ps
VCOM_25ps/div *PRBS = PSEUDORANDOM BIT SEQUENCE = GEN 11, 5.0Gbps; U1 = 200ps
VCOM_25ps/div *PRBS = PSEUDORANDOM BIT SEQUENCE = GEN 11, 5.0Gbps; U1 = 200ps
_______________________________________________________________________________________
5
5.0Gbps PCI Express Passive Switches MAX4888A/MAX4889A
Pin Description
PIN MAX4888A 1, 10, 12, 14, 20, 25, 27 2 3, 9 4 5 6 7 8, 11, 13, 19, 26, 28 15 16 17 18 21 22 23 24 -- -- -- -- -- -- -- -- -- -- -- -- EP MAX4889A 1, 4, 10, 14, 17, 19, 21, 39, 41 9 -- 2 3 6 7 5, 8, 13, 18, 20, 30, 40, 42 31 32 33 34 35 36 37 38 11 12 15 16 22 23 24 25 26 27 28 29 EP NAME GND SEL N.C. COM1+ COM1COM2+ COM2V+ NO2NO2+ NO1NO1+ NC2NC2+ NC1NC1+ COM3+ COM3COM4+ COM4NO4NO4+ NO3NO3+ NC4NC4+ NC3NC3+ EP Ground Digital Control Input No Connection. Not internally connected. Analog Switch 1. Common Positive Terminal. Analog Switch 1. Common Negative Terminal. Analog Switch 2. Common Positive Terminal. Analog Switch 2. Common Negative Terminal. Positive-Supply Voltage Input. Connect V+ to a 1.65V to 3.6V supply voltage. Bypass V+ to GND with a 0.1F capacitor placed as close to the device as possible (See the Board Layout section). Analog Switch 2. Normally Open Negative Terminal. Analog Switch 2. Normally Open Positive Terminal. Analog Switch 1. Normally Open Negative Terminal. Analog Switch 1. Normally Open Positive Terminal. Analog Switch 2. Normally Closed Negative Terminal. Analog Switch 2. Normally Closed Positive Terminal. Analog Switch 1. Normally Closed Negative Terminal. Analog Switch 1. Normally Closed Positive Terminal. Analog Switch 3. Common Positive Terminal. Analog Switch 3. Common Negative Terminal. Analog Switch 4. Common Positive Terminal. Analog Switch 4. Common Negative Terminal. Analog Switch 4. Normally Open Negative Terminal. Analog Switch 4. Normally Open Positive Terminal. Analog Switch 3. Normally Open Negative Terminal. Analog Switch 3. Normally Open Positive Terminal. Analog Switch 4. Normally Closed Negative Terminal. Analog Switch 4. Normally Closed Positive Terminal. Analog Switch 3. Normally Closed Negative Terminal. Analog Switch 3. Normally Closed Positive Terminal. Exposed Paddle. Connect EP to GND. FUNCTION
6
_______________________________________________________________________________________
5.0Gbps PCI Express Passive Switches
Test Circuits/Timing Diagrams
MAX4888A/MAX4889A
MAX4888A/MAX4889A
3.3V V+ COM_ LOGIC INPUT VOUT RL SEL LOGIC INPUT GND SWITCH OUTPUT 0V t ON CL VOUT 0.9 x V0UT t OFF VIH 50% VIL
t r < 5ns t f < 5ns
VN_
NO_ OR NC_
0.9 x VOUT
VOUT = VN_
CL INCLUDES FIXTURE AND STRAY CAPACITANCE. RL RL + RON
(
)
VN_ = VNO_ OR VNC_
Figure 1. Switching Time
_______________________________________________________________________________________
7
5.0Gbps PCI Express Passive Switches MAX4888A/MAX4889A
Test Circuits/Timing Diagrams (continued)
3.3V V+ NO_+ OR NC_+
MAX4888A/MAX4889A
COM_+ OUT+ RL RISE-TIME PROPAGATION DELAY = tPLHX OR tPLHY FALL-TIME PROPAGATION DELAY = tPHLX OR tPHLY tSK1 = DIFFERENCE IN PROPAGATION DELAY (RISE-FALL) BETWEEN ANY TWO PAIRS tSK2 = | tPLHX - tPHLY | OR | tPHLX - tPLHY | BETWEEN TWO LINES ON THE SAME PAIR
RS IN+
RS IN-
NO_- OR NC_-
COM_-
OUTRL
SEL
tINRISE 1.5V VIN+ 0V 1.5V VIN0V tOUTRISE tPLHX 1.5V VOUT+ 0V 1.5V VOUT0V tPHLY tPLHY 50% 50% 50% 50% 10% tPHLX 90% 50% 50% 50% 50% 10%
tINFALL
90%
90% 10%
tOUTFALL
90% 10%
Figure 2. Propagation Delay and Output Skew
8
_______________________________________________________________________________________
5.0Gbps PCI Express Passive Switches
Test Circuits/Timing Diagrams (continued)
3.3V 0.1F NETWORK ANALYZER 0V OR V+ SEL V+ COM_ VIN 50 50
MAX4888A/MAX4889A
V OFF-ISOLATION = 20log OUT VIN V ON-LOSS = 20log OUT VIN CROSSTALK = 20log VOUT VIN
NC_ 50
MAX4888A/MAX4889A
NO_ VOUT MEAS REF
50 GND
50
MEASUREMENTS ARE STANDARDIZED AGAINST SHORTS AT IC TERMINALS. OFF-ISOLATION IS MEASURED BETWEEN COM_ AND "OFF" NO_ OR NC_ TERMINAL ON EACH SWITCH. ON-LOSS IS MEASURED BETWEEN COM_ AND "ON" NO_ OR NC_ TERMINAL ON EACH SWITCH. CROSSTALK IS MEASURED BETWEEN ANY TWO PAIRS. SIGNAL DIRECTION THROUGH SWITCH IS REVERSED; WORST VALUES ARE RECORDED.
Figure 3. On-Loss, Off-Isolation, and Crosstalk
0.1F
3.3V
two sets of eight lanes from a single 16-lane bus. The MAX4888A/MAX4889A feature a single digital control input (SEL) to switch signal paths. The MAX4888A/MAX4889A are fully specified to operate from a single 3.0V to 3.6V power supply and also operate down to 1.65V.
V+ COM_
MAX4888A/MAX4889A
Digital Control Input (SEL)
SEL CAPACITANCE METER NC_ or NO_ GND VIL OR VIH
The MAX4888A/MAX4889A provide a single digital control input (SEL) to select the signal path between the COM__ and NO__/NC__ channels. The truth tables for the MAX4888A/MAX4889A are depicted in the Functional Diagrams/Truth Table section. Drive SEL railto-rail to minimize power consumption.
Analog Signal Levels
Figure 4. Channel Off-/On-Capacitance
Detailed Description
The MAX4888A/MAX4889A high-speed passive switches route PCIe data between two possible destinations. The MAX4888A/MAX4889A are ideal for routing PCIe signals to change the system configuration. For example, in a graphics application, the MAX4888A/MAX4889A create
The MAX4888A/MAX4889A accept standard PCIe signals to a maximum of V+ - 1.2V. Signals on the COM_+ channels are routed to either the NO_+ or NC_+ channels, and signals on the COM_- channels are routed to either the NO_- or NC_- channels. The MAX4888A/ MAX4889A are bidirectional switches, allowing COM__, NO__, and NC__ to be used as either inputs or outputs.
_______________________________________________________________________________________
9
5.0Gbps PCI Express Passive Switches MAX4888A/MAX4889A
Functional Diagrams/Truth Table
V+ V+
MAX4888A
COM1+ COM1NC1+ NC1NO1+ NO1COM2+ COM2NC2+ NC2NO2+ NO2SEL COM3+ COM3GND COM2+ COM2COM1+ COM1-
MAX4889A
NC1+ NC1NO1+ NO1NC2+ NC2NO2+ NO2NC3+ NC3NO3+ NO3-
SEL 0 1
COM__TO COM__TO NC__ NO__ ON OFF OFF ON
COM4+ COM4-
NC4+ NC4NO4+ NO4-
SEL
GND
10
______________________________________________________________________________________
5.0Gbps PCI Express Passive Switches
Applications Information
PCIe Switching
The MAX4888A/MAX4889A primary applications are aimed at reallocating PCIe lanes (see Figure 5). For example, in graphics applications, several manufacturers have found that it is possible to improve performance by a factor of nearly two by splitting a single 16-lane PCIe bus into two 8-lane buses. Two of the more prominent examples are SLITM (Scaled Link Interface) and CrossFireTM. The MAX4889A permits a computer motherboard to operate properly with a single 16-lane graphics card, and can later be updated to dual cards. The same motherboard can be used with dual cards where the user sets a jumper or a bit through software to switch between single- or dual-card operation. Common mode below 1V operation requirement.
ESD Protection
As with all Maxim devices, ESD-protection structures are discharges encountered during handling and assembly. The COM_+ and COM_- lines have extra protection against static electricity. Maxim's engineers have developed state-of-the-art structures to protect these pins against ESD of 6kV without damage. The ESD structures withstand 6kV of ESD in all states: normal operation, state output mode, and powered down.
MAX4888A/MAX4889A
Human Body Model
The MAX4889A COM_+ and COM_- pins are characterized for 6kV ESD protection using the Human Body Model (MIL-STD-883, Method 3015). Figure 6 shows the Human Body Model and Figure 7 shows the current waveform it generates when discharged into low impedance. This model consists of a 100pF capacitor charged to the ESD voltage of interest, which is then discharged into the device through a resistor.
RC 1M CHARGE-CURRENTLIMIT RESISTOR HIGHVOLTAGE DC SOURCE RD 1500 DISCHARGE RESISTANCE DEVICE UNDER TEST
Board Layout
High-speed switches require proper layout and design procedures for optimum performance. Keep designcontrolled impedance PCB traces as short as possible or follow impedance layouts per the PCIe specification. Ensure that power-supply bypass capacitors are placed as close to the device as possible. Multiple bypass capacitors are recommended. Connect all grounds and the exposed pad to large ground planes. Common mode below 1V operation requirement.
Cs 100pF
STORAGE CAPACITOR
DATA DIRECTION
ONE LANE
MAX4888A MAX4889A
Figure 6. Human Body ESD Test Model
IP 100% 90% DATA IS ROUTED TO EITHER BOARD A OR B AMPERES 36.8% 10% 0 0 tRL TIME
Ir
PEAK-TO-PEAK RINGING (NOT DRAWN TO SCALE)
NOTE: ONLY ONE LANE IS SHOWN FOR CLARITY
tDL CURRENT WAVEFORM
A
B
Figure 7. Human Body Model Current Waveform Figure 5. The MAX4888A/MAX4889A Used as a Single-Lane Switch CrossFire is a trademark of ATI Technologies, Inc. SLI is a trademark of NVIDIA Corporation.
______________________________________________________________________________________ 11
Chip Information
PROCESS: CMOS
5.0Gbps PCI Express Passive Switches MAX4888A/MAX4889A
Typical Application Circuit
PCIe GRAPHICS INTERFACE GRAPHICS CARD 1 COM1+ LANE 0 TX COM1COM2+ LANE 1 TX COM2COM3+ LANE 2 TX COM3COM4+ LANE 3 TX COM4NC1+ NC1NC2+ GRAPHICS CARD 2
PCIe BUS
MAX4889A
NC2NC3+ NC3NC4+ NC4NO1+ NO1NO2+ NO2NO3+ NO3NO4+
SEL
NO4-
CHANNEL SELECT
COM1+ LANE 0 RX COM1COM2+ LANE 1 RX COM2COM3+ LANE 2 RX COM3COM4+ LANE 3 RX COM4-
NC1+ NC1NC2+
MAX4889A
NC2NC3+ NC3NC4+ NC4NO1+ NO1NO2+ NO2NO3+ NO3NO4+
SEL
NO4-
CHANNEL SELECT
12
______________________________________________________________________________________
5.0Gbps PCI Express Passive Switches
Package Information
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. PACKAGE TYPE 28 TQFN-EP 42 TQFN-EP PACKAGE CODE T283555-1 T423590M-1 DOCUMENT NO. 21-0184 21-0181
MAX4888/MAX4889
______________________________________________________________________________________
13
5.0Gbps PCI Express Passive Switches MAX4888/MAX4889
Revision History
REVISION NUMBER 0 1 REVISION DATE 4/07 1/09 Initial release Adding ESD information DESCRIPTION PAGES CHANGED -- 1, 3, 11
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
14 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2009 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products. Inc.

▲Up To Search▲

Price & Availability of MAX4888AETI

	To Download MAX4888AETI Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .